1993 Chrysler TEVan - BEV
| Inside the TEVan Controller & Charger Assembly |
Front view of the
inside of the
controller/charger
case. The
controller, and all
high voltage
external
connections are
located on the left
side; while the
charging systems
are on the right.
The two logic
cards separate
the systems,
controller card to
the front, and
charging card to
the rear.
inside of the
controller/charger
case. The
controller, and all
high voltage
external
connections are
located on the left
side; while the
charging systems
are on the right.
The two logic
cards separate
the systems,
controller card to
the front, and
charging card to
the rear.
This view shows
the controller logic
card, removed,
and upside down
to its mounted
position.
the controller logic
card, removed,
and upside down
to its mounted
position.
A closeup of the
top connections
of the TS
designated
controller card.
top connections
of the TS
designated
controller card.
Charger ID tag,
displaying the
"Nife Ver 3"
charging software
designation.
displaying the
"Nife Ver 3"
charging software
designation.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| P i c t u r e s b e l o w . . . |
This shot shows
the internal
components of
the PC Block.
the internal
components of
the PC Block.
This shows a set
of zener diodes
added to the
IBGT control
wiring. This is a
GE
recommended
retrofit to the
original system,
which was known
to be less then
dependable.
of zener diodes
added to the
IBGT control
wiring. This is a
GE
recommended
retrofit to the
original system,
which was known
to be less then
dependable.
The rear left
corner of the
controller, with the
contactor in the
lower left, the KR
relay in the middle,
and the rear of the
logic card to the
right.
corner of the
controller, with the
contactor in the
lower left, the KR
relay in the middle,
and the rear of the
logic card to the
right.